S-35-12 35W 12V 2.5A Single Output Switching Power Supply

AC input voltage range: 85-132VAC/170-264VACSelected by switch47-63Hz240-370VDC
Input current: 0.5A/115V 0.25A/230A
AC Inrush current: Cold-start current15A/115V 30A/230V
Leakage current: <0.5mA/240VAC
Overload protection: 105%-150%Type: Fold back: Current limiting reset: Auto recovery
Over-voltage protection
High-temperature protection
Temperature coefficient: ± 0.03%/0-50
Setup rise hold up time: 200ms, 100ms, 30ms
Vibration: 10-500Hz, 2G 10min, /1cycle, Period for60min, Each axes
Withstand voltage: Input and output internal1.5KVAC, Input and enclosure1.5KVAC, Output and enclosure0.5KVAC
Isolation resistance: Input and output internal: Input and enclosure, Output and enclosure500VDC/100MΩ
Working temperature and humidity: -10~+60Refer to output derating curve, 20%~90%RH
Store temperature and humidity: -20~+85.10%~95%RH
Overall dimension: 129× 98× 38mm
Weight: 0.4Kgs
Safety standards: Meet UL 1012 requirement(Not apply for the mark)
EMC standards: Meet FCC part15J Conduction classB

Note1. The testing condition for the paramenter above is: 230VAC input, rated load, 2570% RH. Humidity. 2. Error. Include the setting error, line stability and load stability. (Note: 5). 3. Wave test: Adopting "A12"double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: When is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%.